Dryer Repair Loganville GA

🔥 20 Loganville Dryer Jobs 🔧 Elements, Rollers and Pulleys on File 🏠 18 Loganville Households 💰 $99 Diagnostic · Applied to the Repair 🛡️ 90-Day Parts and Labor Warranty

Dryer repair in Loganville, GA runs a median of $360 once a part is actually replaced, with the middle half of those jobs between $338 and $488, and the largest dryer invoice we have billed here is $648. That comes from 20 dryer jobs inside Loganville across 18 separate households, 14 of them finishing as paid work and 11 with a part fitted.

There is no outlier table because nothing needs disclosing: no local dryer repair has reached $700. What the written-up tickets do give us is unusually clean: two heating elements and two drum-support jobs, which is the heat-and-mechanics split of dryer repair laid out on four local invoices.

Dryer Repair in Loganville, GA

No heat, three cycles to dry one load, squealing or rumbling, a drum that will not turn, a cycle that stops early. Gas and electric, both counties. Total confirmed before the work starts.

The Dryer Repairs We Have Actually Done in Loganville

Eleven local part-repairs, four of them written up in enough detail to name the work, and they split evenly into the two halves of what goes wrong with a dryer.

DateTotalWhat the invoice records
February 2026$488Samsung, heating element replaced
November 2025$339Samsung, drum pulleys replaced, set of two
January 2026$338Samsung, rollers replaced
May 2026$338Whirlpool, heating element replaced
💡 Two heat jobs and two drum-support jobs, and the drum work is noticeably cheaper. Company-wide a heating element is $362 and drum rollers or an idler pulley are $349, and our four local invoices at $488, $339, $338 and $338 bracket both figures almost exactly. Two of 14 paid Loganville dryer visits closed at $500 or more and none has reached $700.

What a Dryer Repair Costs, by the Part That Failed

The table is company-wide, from 4,218 completed dryer jobs, because eleven local repairs cannot price nine separate components. Every figure is the full ticket: the part, the labor and the service call added together. The Loganville local median of $360 sits between the thermostat line and the heating element line, which is where a suburban electric-dryer stock belongs.

What failedMedian totalMiddle halfJobs (n)
Door switch$321$294 to $437 band54
Drive belt$322$294 to $437 band259
Thermal fuse$332$294 to $437 band84
Drum rollers or idler pulley$349$294 to $437 band218
Thermostat$350$294 to $437 band144
Blocked vent cleared$350$294 to $437 band43
Heating element$362$294 to $437 band360
Drive motor$394$294 to $437 band55
Control board$478$294 to $437 band71

The row that decides the economics of dryer repair is the one that is not a part at all. Clearing a blocked vent is $350, twelve dollars less than replacing the heating element at $362, and a blocked vent is the most common reason the element burns out in the first place.

Two of our four written-up Loganville repairs are heating elements, so this is not an abstract point in this city. A dryer that cannot get rid of its own heat runs the element hotter and longer on every cycle until the element, a thermostat or the thermal fuse gives up, and by then you are paying for the part and the airflow both.

Why Loganville Dryers Fail the Way They Do

Two heating elements, and what a $488 one usually means $362 COMPANY-WIDE

A Samsung element at $488 and a Whirlpool element at $338, against a company-wide figure of $362. The cheaper one is an ordinary element replacement; the dearer one is what happens when more than one part in the heat circuit has failed by the time we arrive.

The element, the cycling thermostat, the high-limit thermostat and the thermal fuse all live in the same airflow, and a chronically restricted exhaust cooks them in sequence. Households usually notice only at the end of that sequence, when the machine produces no heat at all.

The earlier and cheaper symptom is a dryer that still heats but needs two or three cycles to finish a load. Background is in dryer not heating and the element itself in how to replace a dryer heating element.

Rollers and pulleys are the noise you have been ignoring $338 AND $339

Two of our four written-up Loganville repairs are drum support: rollers replaced at $338 and a set of two drum pulleys at $339. The drum does not spin on an axle; it rests on rubber-tyred rollers and is turned by a belt over an idler pulley, and every one of those bearings wears.

What you hear first is a squeal that rises and falls with the drum, then a rhythmic thump as a roller develops a flat spot.

Neither is a safety emergency, which is why people run the machine like that for months, and that is the mistake: a seized roller scores the drum, and a drum is not an economical part. At $349 company-wide, doing it when it starts squealing is what keeps the machine repairable.

Airflow is the fault behind the heat faults $350 TO CLEAR

Lint escapes the screen on every load and settles in the blower housing, the internal lint duct and the exhaust run to the wall. As that path narrows the machine moves less air, so moisture stays in the drum and the heat has nowhere to go.

The household notices longer cycles; the machine experiences rising element temperature on every run. Loganville grew from 5,435 residents in 2000 to 14,127 in 2020, and the modern floorplans that filled it put the laundry room inside the house rather than against an outside wall, so the run is long and every elbow costs several feet of straight run in resistance.

Clearing it is $350 company-wide, less than the $362 element it protects. See why a dryer takes too long.

The thermal fuse is a message rather than a fault $332 ALL IN

A thermal fuse is a deliberate sacrificial part, engineered to fail so the machine does not, and it blows when the dryer overheats. A blown fuse is therefore not bad luck, it is the appliance reporting that the exhaust is restricted. Replacing it and leaving the airflow alone simply resets the countdown.

On many models a blown fuse kills the whole machine rather than just the heat, which is why a completely dead dryer is often the cheapest repair on the table rather than the most expensive, and why we measure airflow before fitting anything.

Samsung dominates this laundry room 6 OF 12 BRANDED

On our Loganville dryer list Samsung is first at 6 jobs, with Whirlpool at 3 and Kenmore, Electrolux and Maytag at 1 each. Three of our four written-up repairs are Samsung machines. A Samsung dryer is sensor-driven: it ends the cycle when metal strips inside the drum stop detecting moisture in the tumbling load, and it reports faults as codes rather than simply stopping.

That is worth knowing because it produces a complaint no timer-driven machine can, which is a cycle that ends after fifteen minutes with the load still soaking. Nothing is wrong with the heat circuit at all; the sensor strips are coated with softener residue or one has failed. It is a count of service calls and not a reliability ranking.

Stacked pairs, and why that visit costs $150 TWO MACHINES, ONE OPENING

One of our Loganville records is an Electrolux stacked washer-dryer combination. On a stacked pair the diagnostic is $150 rather than $99, for the same reason a double wall oven is: two machines are built into one opening and both have to come apart to reach either one.

The fee still comes off the bill when you approve the repair. It is worth saying when you book, because it changes how long the window needs to be and what the technician brings. The same logic works in your favour if two separate machines are misbehaving: the diagnostic covers the attendance rather than the appliance.

What the $99 diagnostic covers before any part is ordered. The technician measures actual exhaust airflow rather than estimating it, checks the transition hose behind the machine and the run out to the exterior hood, inspects the blower housing and internal lint duct, tests the heat circuit end to end including the thermal fuse and both thermostats rather than one component at a time, cleans and tests the moisture sensor strips on a sensor-driven machine, spins the drum by hand to feel the rollers and the idler, and reads stored fault codes. All of that is inside the diagnostic fee, and the fee comes off the bill when you approve the repair.

🚚 14 of our 20 Loganville dryer jobs landed in the last twelve months. Laundry backs up fast in a family house, the whole city is one dispatch zone across both counties, and most dryer repairs are a single visit.

Match Your Symptom to the Likely Cause

  • Tumbles but produces no heat at all — heating element at $362, cycling thermostat at $350 or thermal fuse at $332 on an electric machine. Two of our written-up Loganville repairs are elements, at $488 and $338. See dryer not heating.
  • Squeals or grinds, louder as the drum turns — drum rollers or the idler pulley at $349. We replaced rollers locally at $338 and a set of two drum pulleys at $339. Do it while it is squealing, because a seized roller scores the drum.
  • Rhythmic thump as the drum goes round — a flat spot on a roller. Same repair, same price, and it gets worse rather than better.
  • Runs a full cycle, clothes still damp — airflow rather than heat. The blower housing, the internal lint duct, the vent run, or a cracked blower wheel at $368. Clearing the run is $350 and it protects the element. See why a dryer takes too long.
  • Cycle ends after fifteen minutes and the load is soaking — on a Samsung or other sensor-driven machine, the moisture sensor strips. Softener residue makes them read dry when the load is wet, and nothing is wrong with the heat circuit.
  • Heats, then shuts off part way through — the high-limit thermostat cutting out because the machine is overheating, which points straight back at the exhaust.
  • Hums but the drum does not move — drive belt at $322, or the drive motor at $394 if there is no hum either. The belt is the more common and the cheaper.

Repair or Replace a Dryer in Loganville

A dryer is the simplest machine in the laundry room and the cheapest to keep running. Every component on the company-wide table sits between $321 and $478, our local median is $360, the largest local dryer invoice is $648, and a mid-market replacement dryer delivered, installed and vented costs well above that before haul-away.

On any machine under about twelve years old, repair wins on almost every fault, and dryers routinely run fifteen years or more when the exhaust is kept clear. Expected service life is in how long dryers last.

Two exceptions are worth naming and our own local file points at how to avoid the first. A drum scored by a seized roller is one, because a drum is not an economical part, and the two roller and pulley jobs in our Loganville file at $338 and $339 are exactly the repair that prevents it.

The other is a machine needing a control board at $478 on top of a heat failure at the same visit, which on an older unit starts to approach a new appliance. Both are largely avoidable by dealing with noise and airflow early.

The framework is in the repair or replace guide, and the machine beside it is on the Loganville washer page, which carries the highest washer median in this cluster and explains why.

A dryer that smells scorched should not run again that day. Lint is the fuel and a restricted vent is the mechanism behind dryer fires, and in this housing stock the run from an interior laundry room is long enough to hold a great deal of it. Two of our four written-up local dryer repairs are heating elements, which is what a chronically restricted exhaust produces. If the laundry room smells hot, if the exterior hood is not blowing warm air while the machine runs, or if the cycle keeps cutting out early, stop using it and book the visit. On a gas dryer, if you smell gas at any point, leave the machine alone, do not touch any electrical switch, get everyone out and call Atlanta Gas Light or 911 from outside before you call any repair company.
How these numbers are built. Every figure on this page is the full ticket: the part, the labor and the service call added together, taken from completed invoices rather than a price list. The diagnostic is $99 and it comes off the bill when you approve the repair, $150 on a stacked washer-dryer or a double wall oven because two machines have to come apart. Work is covered by a 90-day parts and labor warranty. The Loganville figures on this page come from 20 local dryer jobs, of which 11 involved a part being fitted and four are written up in enough detail to name the component. The component table is company-wide, from 4,218 completed dryer repairs.

Discounts Applied Automatically

$30 OFFVeteransEvery repair
$30 OFFSeniorsEvery repair
$20 OFFNew CustomersFirst repair

Priority Membership

$179 a year, five diagnostics and priority slots

  • Five free diagnostic visits a year, a $495 value
  • Priority scheduling with 24 to 48 hour response
  • $30 off labor on every repair
  • Extended warranty on all Bozmanfix work

What Atlanta Area Customers Say About Bozmanfix

★★★★★

“Great job and completed my dryer issue in the same day!”

— IMANI WARDEN · Google Review
★★★★★

“Very prompt and fixed my dryer quickly and serviceman was very knowledgeable.”

— Anita Smith · Google Review
★★★★★

“My dryer was repaired sooner than I thought it was. Quick and reliable service. Would recommend. 10/10”

— Jes S · Google Review
★★★★★

“Came to my home to repair my dryer. They did a great job and I really appreciate their service and customer service.”

— Diuntae Ward · Google Review

Loganville Dryer Repair, Answered

How much does dryer repair cost in Loganville, GA?

The median is $360 once a part is replaced, with the middle half of local jobs between $338 and $488, from 20 dryer jobs inside Loganville. The largest dryer invoice we have billed here is $648, so there is no four-figure tail on this appliance. The $99 diagnostic comes off the bill when you approve the repair, and every figure is the part, the labor and the service call together.

Why did one heating element cost $488 and another $338?

The cheaper one is an ordinary element replacement, close to the company-wide figure of $362. The dearer one is what happens when more than one part in the heat circuit has failed by the time we arrive.

The element, the cycling thermostat, the high-limit thermostat and the thermal fuse all sit in the same airflow, and a chronically restricted exhaust cooks them in sequence, so two or three parts need replacing together.

The earlier and cheaper symptom is a dryer that still heats but needs two or three cycles per load.

My dryer squeals. Is that urgent?

Not urgent, but do not leave it. The drum does not spin on an axle: it rests on rubber-tyred rollers and is turned by a belt over an idler pulley, and those bearings wear. A squeal that rises and falls with the drum is that wear, and a rhythmic thump is a roller that has developed a flat spot.

At $349 company-wide it is a cheap repair, and we did it twice in Loganville at $338 and $339. Left running, a seized roller scores the drum, and a drum is not an economical part.

My dryer stops after fifteen minutes and the clothes are still wet. Why?

On a Samsung or another sensor-driven machine, almost certainly the moisture sensors rather than the heat. The machine decides the load is dry by measuring conductivity between two metal strips inside the drum, and softener residue on those strips or a failed sensor makes it read dry when the load is soaking.

Nothing is wrong with the heat circuit. Samsung is 6 of the 12 branded dryers on our local list, so this comes up here.

Is it worth paying to have a dryer vent cleared?

On the numbers, yes. Clearing a blocked run is $350 company-wide and replacing a heating element is $362, and the blocked run is the most common reason the element burns out in the first place. Two of our four written-up Loganville repairs are elements, so this is not an abstract point here.

A dryer that cannot exhaust runs its element hotter and longer on every cycle until something in the heat circuit gives up.

Do you repair stacked washer-dryer units in Loganville?

Yes, and one of our local records is an Electrolux stacked combination. The diagnostic on a stacked pair is $150 rather than $99, because two machines are built into one opening and both have to be dismantled to reach either one, and that fee still comes off the bill when you approve the repair. Mention it when you book, because it changes the window and what the technician brings.

Which dryer brands do you see most in Loganville?

Samsung leads at 6 of the 12 branded records, with Whirlpool at 3 and Kenmore, Electrolux and Maytag at 1 each, across 20 local dryer jobs. Three of our four written-up repairs are Samsung machines. Samsung dryers are sensor-driven and report faults as codes, which produces complaints a timer-driven machine cannot. These are counts of service calls, not a reliability ranking.


Book a Loganville Dryer Technician

Airflow measured, the drum bearings felt by hand, the heat circuit tested end to end, the $99 diagnostic applied to the repair and a 90-day parts and labor warranty behind the work.

Book online Call us
Book online Call us