Dryer Repair in Oakleaf, FL
Dryer repair in Oakleaf, FL runs a median of $369 once a part is replaced, and the middle half of jobs lands between $336 and $383 — a window just $47 wide. That comes from 12 dryer jobs inside ZIP 32065, 10 paid and 9 with a component replaced.
Two numbers make this the most predictable repair on the entire cluster. Nine of ten paid visits ended with a part fitted, a 90 percent share against 79.5 percent company-wide, which is itself the highest of any appliance we service. And that $47 band compares with $143 company-wide.
If your Oakleaf dryer has stopped working, it is almost certainly broken, and the bill is almost certainly going to be in the high three hundreds.
Dryer Repair in Oakleaf, FL 32065
All 12 of our Oakleaf dryer jobs fall inside the last twelve months. Elements, belts, rollers and switches for the mainstream platforms ride on the van, so most of these finish on the first visit.
What Dryer Repair Costs in Oakleaf, by Component
The component rows are company-wide, because nine local jobs cannot be split across ten named repairs. The Oakleaf rows at the bottom are ours and both are solid — nine component jobs is a real sample for a single appliance in a single ZIP, and the tightness of the local band is itself the finding rather than an artefact.
Every figure is the part, the labour and the service call together, which is what lands on your invoice rather than what a parts website charges for the component alone.
| Repair | Median, full ticket | Source | Jobs (n) |
|---|---|---|---|
| Door switch | $321 | Company-wide | 54 |
| Drive belt | $322 | Company-wide | 259 |
| Thermal fuse | $332 | Company-wide | 84 |
| Drum rollers or idler pulley | $349 | Company-wide | 218 |
| Thermostat | $350 | Company-wide | 144 |
| Blocked vent cleared | $350 | Company-wide | 43 |
| Heating element | $362 | Company-wide | 360 |
| Blower wheel | $368 | Company-wide | 22 |
| Drive motor | $394 | Company-wide | 55 |
| Control board | $478 | Company-wide | 71 |
| All dryer jobs with a part replaced | $352 · middle half $294 to $437 | Company-wide | 4,218 |
| All dryer jobs with a part replaced | $369 · middle half $336 to $383 | Oakleaf 32065 | 9 |
The named jobs bear that out exactly. A Whirlpool heating element at $336. A Maytag door switch with an operational calibration at $318. A Kenmore repair at $369.
Elsewhere in this ZIP, on tickets where the paperwork did not carry an appliance tag, we replaced a heating element together with an idler pulley and cleaned the cabinet at $347, replaced a belt and a roller with a machine clean at $335, and installed a new air duct for a Samsung dryer at $249.
One household stopped at the diagnosis on a thermal cut-off kit and thermistor quoted at $499, which is a fair decision on an older machine and not one we push back on. The pattern is consistent: mid-range mechanical work, done in one visit.
Why Oakleaf Dryers Fail the Way They Do
There is a tagging caveat worth putting up front rather than hiding, because it changes how you should read the volume on this page.
Forty-nine of our 141 jobs in 32065 — nearly 35 percent, the highest untagged share of any Clay County ZIP we cover — carry no appliance tag on the paperwork at all, and several of them are plainly dryer work when you read the description: heating elements, idler pulleys, belts, rollers, air ducts.
So the honest statement is that we have run at least 12 dryer jobs here and probably more. The prices and the part-fitted share on this page come from the 12 we can identify with certainty, which is the conservative way to do it.
The lowest part-fitted share anywhere in our Clay County work 9 OF 10 PAID VISITS
Ninety percent of paid Oakleaf dryer visits ended with a part fitted. Company-wide the dryer figure is 20.5 percent, already the lowest of any appliance, and in this same ZIP refrigerators sit close to even. So a dryer complaint in Oakleaf is four times more likely to produce a real repair than a refrigerator complaint from the same street.
The reason is structural: a dryer either heats or it does not, tumbles or it does not, and behind either symptom there is nearly always a failed element, fuse, belt, roller, thermostat or motor. There is very little in a dryer that can look broken while being fine.
Clearing a vent costs the same as replacing the element it destroyed $350 AGAINST $362
This is the most useful line on the page. A blocked vent is the most common reason a heating element burns out, and clearing one runs $350 company-wide against $362 for a new element.
Our Oakleaf book contains both sides of that: on one visit we replaced a heating element and an idler pulley and cleaned the cabinet, on another we installed an entirely new air duct for a Samsung dryer, and on a third the inspection note records that the machine reached 220°F with the vents confirmed clear — which is what a healthy dryer should look like.
Family housing built from 2002 onward puts laundry rooms inside the house with the vent running through a wall or an attic, so the duct is longer, has more elbows, and nobody has looked inside it since the house was finished.
The brand list is flat, which is why parts ride on the van NO PLATFORM ABOVE TWO JOBS
Nine of our Oakleaf dryer jobs carry a brand and no single one leads: GE 2, Whirlpool 2, Kenmore 2, Samsung 2, Maytag 1. That evenness is genuinely useful rather than just tidy, because common failure parts for all five of those platforms ride on the van.
Elements, belts, rollers, thermal fuses and door switches are largely interchangeable in availability terms across the mainstream brands, which is a real part of why dryer repairs here finish in a single visit and land in such a narrow price band.
Control boards are the exception at $478 and they are the one thing likely to need ordering. As always, a brand table records how often we are called out, not reliability.
A stacked pair is a different job, and a different diagnostic $150 RATHER THAN $99
One of our Oakleaf jobs was logged as a Whirlpool stacked washer-dryer service call at $415. On a stacked unit the two halves have to be pulled and separated before either can be assessed, and that is genuine work before any diagnosis begins — which is why the diagnostic is $150 rather than $99 on a stacked pair, the same as on a double wall oven.
It is still credited against the repair when you approve the work, and the completed repair carries the same 90-day parts and labor warranty. Tell us at booking if your laundry is stacked so we schedule the time properly.
Nine of our ten paid Oakleaf dryer visits ended with a real part replaced. Plan on $336 to $383, and expect it to finish in one visit. Book online or call (954) 902-6229.
Match Your Symptom to the Likely Cause
- Tumbles but clothes come out damp — heating element at $362, or a vent run that has silted up at $350. Company-wide this symptom is 226 repairs at a $365 median. Check the outside vent flap when you book; it decides which of the two you are buying.
- No heat at all — element, thermal fuse at $332, or a thermostat at $350. Our largest dryer symptom company-wide at 969 repairs, median $368. See dryer not heating.
- Runs then shuts off partway through a cycle — a thermostat cutting out on high temperature, which nearly always means restricted airflow rather than a bad part. Act on this one quickly, because the same heat is working on the element.
- Loud rumbling, thumping or squealing — drum rollers or the idler pulley at $349, or the blower wheel at $368. Noise is our biggest dryer category company-wide at 601 repairs. One Oakleaf job replaced the idler pulley alongside the element.
- Motor runs but the drum does not turn — drive belt at $322, one of the cheapest lines on the table and a same-visit repair on almost every platform.
- Completely dead, no lights, no response — door switch at $321, thermal fuse, or a control board at $478. One of our Oakleaf repairs was exactly a door switch, at $318.
Where in Oakleaf We See This Work
All 12 dryer jobs are in ZIP 32065 and all 12 fall inside the last twelve months, so this is a current sample rather than a historical one. Every work order is written Orange Park, because that is the only city name the Postal Service accepts for this postcode, even though the Census counts 31,034 people here under the name Oakleaf Plantation.
Which page you want is decided by your ZIP: 32065 is this one, and if your ZIP is 32073 — the incorporated town of Orange Park, about four miles south-east — you want dryer repair in Orange Park, a separate cluster on separate work.
The money is the same either way: dryer repairs run $352 across 10 component jobs in 32073 against $369 across 9 here. One price across the whole of 32065, no travel surcharge. Coverage detail on the Oakleaf appliance repair hub.
Repair or Replace, in Oakleaf Numbers
A dryer repair with a part replaced runs $369 here against roughly $650 to $1,100 for a mid-market replacement installed.
That is the widest repair-to-replace gap of any appliance in this cluster, and it explains why dryers carry the most straightforward call in our entire company book — only 20.5 percent of households who receive a dryer diagnosis turn the repair down, against 41 percent on washers and 44 percent on freezers.
A dryer is a mechanically simple machine with a long life, and a $369 repair on a sound drum and motor is straightforwardly good value. The cases that turn are a control board at $478 on a machine past ten years, and a second heating element on a dryer whose vent was never dealt with — there the honest fix is the duct, not another part.
Expected life is in how long dryers last, framework in the repair or replace guide.
Discounts Applied Automatically
Priority Membership
$179 a year — five diagnostics, priority slots
- Five free diagnostic visits a year, a $495 value
- Priority scheduling with 24 to 48 hour response
- $30 off labor on every repair
- Extended warranty on all Bozmanfix work
What Customers Say About Our Dryer Work
“Was having dryer problems. Chris was great. Very efficient, was in and out in 15 minutes, super easy. Highly recommend.”
“They were very quick and prompt with showing up to take care of our dryer on a Saturday afternoon. Thank you.”
“Quick and good service. Dimitri is very efficient. First he diagnosed the problem, and a second visit was needed to install new parts. Good job Dimitri, recommend them highly.”
“Excellent technician.”
Dryer Repair in Oakleaf — Questions We Get
How much does dryer repair cost in Oakleaf, FL?
The median is $369 once a part is replaced, parts and labor and the service call together, with the middle half of jobs between $336 and $383. That comes from 9 component replacements out of 10 paid dryer visits in ZIP 32065.
The company figure is $352 across 4,218 jobs with a much wider middle half of $294 to $437, so Oakleaf dryer repairs are both slightly dearer and far more predictable.
By component, company-wide: door switch $321, drive belt $322, thermal fuse $332, drum rollers $349, thermostat $350, vent cleared $350, heating element $362, blower wheel $368, drive motor $394, control board $478.
Why is the price band so narrow here?
Because nearly every dryer repair we have done in this ZIP is one of the mid-priced mechanical parts — a heating element, a belt, drum rollers, an idler pulley, a door switch — and almost none are the cheap or expensive extremes. Nine local repairs land inside a $47 window against $143 company-wide.
That is also why we are willing to give a realistic range for a dryer over the phone and will not do the same for a refrigerator, where the same ZIP produces a bill of either $99 or roughly $400.
What do I pay if the dryer does not need a part?
In Oakleaf, 1 of 10 paid dryer visits, which is 10 percent — half the company-wide dryer rate of 20.5 percent, which is already the lowest of any appliance we service. In the same ZIP, refrigerator visits end with a part fitted 59.3 percent of the time.
So a dryer that has stopped working here is four times more likely to have a genuinely failed part in it than a refrigerator complaint from the same street. If we do confirm the machine is sound, you pay the $99 diagnostic and nothing else.
My dryer runs but the clothes are still damp. What is it?
Either the heat has failed or the air is not moving, and you can tell which for free.
Run the machine two minutes and hold your hand over the outside vent flap — strong warm airflow means the duct is clear and the fault is the element at $362, a thermal fuse at $332 or a thermostat at $350; weak airflow means the duct is the problem and clearing it runs $350.
A blocked vent is also the most common reason an element burns out in the first place, so getting the order right is the difference between fixing the cause and paying for the same part twice.
Do you clean dryer vents in Oakleaf?
Yes. Company-wide a cleared blocked vent runs $350 across 43 jobs, essentially the same money as a new heating element. In this ZIP we have installed a complete new air duct for a Samsung dryer, and on another visit our inspection note records the machine reaching 220°F with the vents confirmed clear.
Family housing built from 2002 onward tends to run the vent through a wall or an attic to reach outside, so the duct is long, has several elbows, and typically has not been inspected since the house was built. A blocked duct is a fire risk as well as a repair bill.
Which dryer brands do you see in Oakleaf?
Of 9 branded dryer jobs in 32065, no platform leads: GE 2, Whirlpool 2, Kenmore 2, Samsung 2 and Maytag 1. That evenness is part of why repairs here finish in one visit — common failure parts for all five platforms ride on the van, and elements, belts, rollers, fuses and door switches are broadly available across the mainstream brands.
Control boards at $478 are the exception and the one component most likely to need ordering. This reflects how often we are called to a brand, not how reliable it is.
Why is the diagnostic $150 on my stacked laundry unit?
Because a stacked washer-dryer has to be pulled out and separated before either half can be assessed, and that is real work before any diagnosis starts. The same applies to a double wall oven. One of our Oakleaf jobs was exactly a stacked Whirlpool pair.
On a freestanding dryer the diagnostic is the standard $99. Either way the fee is credited against the repair total when you approve the work, and the completed repair carries the same 90-day parts and labor warranty.
Is it worth repairing, or should I replace it?
At $369 median with a part replaced against roughly $650 to $1,100 for a mid-market replacement installed, repair wins comfortably on any dryer with a sound drum and motor. That is why 20.5 percent of households company-wide go ahead with a dryer repair, the highest rate of any appliance.
Two cases deserve a second thought: a control board at $478 on a machine past ten years, and a second heating element on a dryer whose vent was never dealt with. One Oakleaf household stopped at the diagnosis on a thermal cut-off kit and thermistor quoted at $499, which was a reasonable call on an older machine.
Appliance Repair Services in Oakleaf, FL
Five more service pages for ZIP 32065, each built on the local jobs behind it.
Appliance Repair in Oakleaf — cluster hub, all of 32065 Serving Oakleaf, FL and the wider Jacksonville area → View our full service areaBook Dryer Repair in Oakleaf, FL
12 dryer jobs on record in ZIP 32065, all of them in the last twelve months. $99 diagnostic applied to the repair and $150 on a stacked pair, 90-day parts and labor warranty.