Dryer Repair in Middleburg, FL

🔧 13 Middleburg Dryer Jobs 💰 $328 Median With a Part Replaced 📈 80 Percent End With a Part Fitted 🌡️ Our Biggest Local Ticket Was a Vent, Not a Part 🛡️ 90-Day Parts and Labor Warranty

Dryer repair in Middleburg, FL runs a median of $328 once a part is replaced, with the middle half of jobs between $279 and $389. That comes from 13 dryer jobs inside ZIP 32068, 10 of which finished as paid work and 8 of which involved replacing a real component.

Two things make the dryer the most predictable appliance on this cluster. It is the cheapest — $328 locally against $352 company-wide, and cheaper than every other appliance we service in Middleburg.

And only two of ten paid visits ended with no part to fit, an 80 percent part-fitted share against 60 percent on washers in this same ZIP. Put plainly: if a Middleburg dryer has stopped working, it is almost certainly genuinely broken.

Dryer Repair in Middleburg, FL 32068

All 13 of our Middleburg dryer jobs fall inside the last twelve months. Common dryer failure parts ride on the van, so most of these are a single visit.

What Dryer Repair Costs in Middleburg, by Component

The component medians below are company-wide, because eight local component jobs cannot be honestly split across ten named repairs. The two Middleburg rows at the bottom are ours and they stand on real local volume. Every figure is the part, the labour and the service call together — the number that lands on your invoice, not the price of the component on a parts website.

RepairMedian, full ticketSourceJobs (n)
Door switch$321Company-wide54
Drive belt$322Company-wide259
Thermal fuse$332Company-wide84
Drum rollers or idler pulley$349Company-wide218
Thermostat$350Company-wide144
Blocked vent cleared$350Company-wide43
Heating element$362Company-wide360
Blower wheel$368Company-wide22
Drive motor$394Company-wide55
Control board$478Company-wide71
All dryer jobs with a part replaced$352Company-wide4,218
All dryer jobs with a part replaced$328Middleburg 320688
💡 Look at the sixth row. Clearing a blocked vent costs the same as replacing a heating element — $350 against $362 — and a blocked vent is the single most common reason a heating element burns out in the first place. That is the most useful sentence on this page. The cheap version of this repair is the one you do before the element fails.

Our own Middleburg book demonstrates it. The largest dryer ticket we have run in this ZIP finished at $660 and the work was a heating element, two thermostats and a full cleaning of the machine on the same visit.

That is not a dryer that suffered one component failure — that is a dryer that was running hot for a long time because the air had nowhere to go, until the element and both safety thermostats gave out together.

A second Middleburg job replaced three thermostats and cleaned the dryer at $275, which is the same story caught slightly earlier. Against those, the ordinary repairs in our local book are modest: a Maytag drive belt at $336, a GE timer at $279, an LG terminal block assembly at $349.

Why Middleburg Dryers Fail the Way They Do

ZIP 32068 is 115.5 square miles with 20,311 housing units, 79 percent of them owner-occupied, and the housing stock is overwhelmingly single-family rather than apartment. That matters for dryers more than for any other appliance, because a single-family house puts the laundry room in an interior wall or a garage and runs the vent through the wall, the attic or under the floor to reach outside.

Longer vent runs, more elbows, and a duct nobody has looked inside since the house was built. Add Florida humidity, which means the air being pushed through that duct is already carrying moisture, and lint that would stay loose in a dry climate packs into a felt-like layer instead.

That is the mechanism behind the $660 job above, and it is why our company-wide vent-cleaning line exists at all.

The highest part-fitted share in the cluster, alongside ovens 2 OF 10 PAID VISITS

Eighty percent of our paid Middleburg dryer visits ended with a part fitted, matching the company-wide dryer figure of 79.5 percent — which is itself the highest of any appliance we service anywhere. Compare that with 60 percent on washers in this same ZIP and the picture is clear: there is very little ambiguity in a dryer.

It heats or it does not, it tumbles or it does not, and behind either symptom there is nearly always a failed element, fuse, belt, roller, thermostat or motor. That predictability is why we can give you a realistic range for a dryer over the phone and will not do the same for a refrigerator.

The cheapest appliance we service in Middleburg $328 AGAINST $348 TO $454

With a part replaced, dryers run $328 here, refrigerators $348, ovens $358, and our thin local samples on washers and dishwashers came out at $427 and $454. Dryers are also below their own company median of $352.

The reason is structural rather than local: a dryer is a drum, a motor, a heater and a handful of safety switches, all reachable from the front or the back of a machine that is not plumbed in.

There is no sealed system, no water circuit and no cabinet full of insulation to work around, so the labour half of the ticket is smaller. The one exception is a stacked washer-dryer, which carries a $150 diagnostic instead of $99 because the pair has to be separated before anything can be seen.

The local repairs skew to older, simpler machines TIMER · TERMINAL BLOCK · BELT

Three of our eight Middleburg component jobs are parts you find on straightforward machines rather than on the newest platforms: a mechanical timer, a terminal block assembly on the 240-volt supply side, and a drive belt. Only one dryer control board appears in the whole local book.

Company-wide, boards are 71 dryer replacements at $478, comfortably the most expensive line on the table, so their near-absence here is worth naming — with the honest caveat that eight jobs cannot prove a pattern. It fits a ZIP with a median home value of $289,500 and a long-established housing stock rather than a new-build subdivision full of touchscreen laundry pairs.

On gas dryers we will not publish a component price TOO FEW JOBS

Much of rural Clay County runs on propane rather than piped natural gas, and gas dryers do exist in this ZIP. But across our entire company book, gas dryer igniters and valve coils appear in single-figure numbers — fewer than ten replacements each — and we are not going to build a price line out of that and call it data.

What we can tell you is the shape of the job: on a gas dryer, no-heat is usually the igniter, the flame sensor or the valve coils, all of which sit in the burner tube at the bottom front of the machine, and all of which are diagnosed on the same $99 visit as an electric fault. You get the total before we start either way.

Eight of our ten paid Middleburg dryer visits ended with a real part replaced. If yours has stopped heating or stopped tumbling, the odds are four to one that there is something genuinely broken in it. Book online or call (954) 902-6229.

Match Your Symptom to the Likely Cause

  • Tumbles but the clothes come out damp — heating element at $362 on electric, or a vent run that has silted up at $350. Company-wide this symptom is 226 repairs at a $365 median. Check the outside vent flap while the machine runs: weak or no airflow points at the duct rather than the element.
  • No heat at all — element, thermal fuse at $332, or a thermostat at $350. This is our single biggest dryer symptom company-wide at 969 repairs, median $368. On a gas machine it is the igniter or the valve coils instead. See dryer not heating.
  • Runs, then shuts off partway through the cycle — a thermostat cutting out on high temperature, which almost always means restricted airflow rather than a bad part. 34 repairs at $368. This is the one to act on quickly, because the same heat is working on the element.
  • Loud rumbling or squealing — drum rollers or the idler pulley at $349, or the blower wheel at $368. Noise is our largest dryer category of all at 601 repairs, median $349.
  • Motor runs but the drum does not turn — drive belt at $322, one of the cheapest repairs on the table and a same-visit job on most platforms.
  • Completely dead, no lights, no response — door switch at $321, thermal fuse, the terminal block on the supply side, or a control board at $478. One of our Middleburg jobs was exactly a terminal block assembly.
Two checks, and one of them matters more than anything else on this page. First, run the dryer for two minutes and put your hand over the outside vent flap. Strong warm airflow means the duct is clear; weak airflow means it is not, and everything else you are about to spend money on is downstream of that. Second, check the lint filter housing itself, not just the screen — a compacted layer inside the housing below the filter restricts airflow exactly like a blocked duct. A blocked vent is also a fire risk, which is the real reason we treat it as the first question rather than the last.

Where in Middleburg We See This Work

All 13 Middleburg dryer jobs are in ZIP 32068, and all 13 fall inside the last twelve months, which makes this the most concentrated recent sample in the cluster.

32068 is a single USPS city name with no aliases — 112 of our 113 Middleburg work orders are written exactly that way — so unlike its neighbours in Clay County there is no ambiguity about whether this page covers your address.

The neighbouring ZIPs are less tidy: 32065 next door is officially Orange Park even though the Census counts 31,034 people there as Oakleaf Plantation, and 32003 answers to three names at once.

What 32068 does have is size, 115.5 square miles of it, so book early in the day if you are toward the western or southern edge. Same price everywhere, no travel surcharge. Full coverage on the Middleburg appliance repair hub.

Repair or Replace, in Middleburg Numbers

A dryer repair with a part replaced runs $328 here, against roughly $650 to $1,100 for a mid-market replacement installed. A dryer is a simple machine with a long life, and a $328 repair on a working drum and motor is straightforwardly good value.

The case where it turns is a control board at $478 on a machine already past ten years, or a machine that has had the element replaced once already because nobody dealt with the vent.

Expected service life is in how long dryers last, and the wider framework in the repair or replace guide.

Discounts Applied Automatically

$30 OFFVeteransEvery repair
$30 OFFSeniorsEvery repair
$20 OFFNew CustomersFirst repair

Priority Membership

$179 a year — five diagnostics, priority slots

  • Five free diagnostic visits a year, a $495 value
  • Priority scheduling with 24 to 48 hour response
  • $30 off labor on every repair
  • Extended warranty on all Bozmanfix work

What Customers Say About Our Dryer Work

★★★★★

“Dmitriy did efficient and effective work for my dryer that had a busted component. Showed me the breaks specifically and explained the repairs well. Happy and would use again.”

— Nathaniel Wiest · Verified Google review
★★★★★

“Vladimir did an amazing job, he was very fast and professional. My dryer works great.”

— CB Utilities · Verified Google review
★★★★★

“My dryer quit working last week. They got me scheduled very quickly, came out on time and fixed the problem within 30 minutes. I always love using them.”

— Courtney Nicodemus · Verified Google review
★★★★★

“Vladimir was very quick and efficient. Very kind and respectful to our home.”

— Rolande Paul · Verified Google review

Dryer Repair in Middleburg — Questions We Get

How much does dryer repair cost in Middleburg, FL?

The median is $328 once a part is replaced, parts and labor and the service call together, with the middle half of jobs between $279 and $389. That comes from 8 component replacements out of 10 paid dryer visits inside ZIP 32068, and it sits below the company-wide dryer median of $352 across 4,218 jobs.

By component, company-wide: door switch $321, drive belt $322, thermal fuse $332, drum rollers $349, thermostat $350, vent cleared $350, heating element $362, blower wheel $368, drive motor $394, control board $478.

My dryer runs but the clothes are still damp. What is wrong?

Either the heat has failed or the air is not moving. Run the machine for two minutes and hold your hand over the outside vent flap — strong warm airflow means the duct is clear and the fault is the element, a thermostat or a fuse; weak airflow means the duct is the problem and the element may be fine.

Company-wide this symptom is 226 repairs at a $365 median, and clearing a blocked vent costs $350 against $362 for an element. Getting that order right is the difference between fixing the cause and replacing a part that will fail again.

Do you clean dryer vents in Middleburg?

Yes, and company-wide a cleared blocked vent runs a $350 median across 43 jobs. It is worth knowing that this is the same money as a new heating element, and that a blocked vent is the most common reason elements and thermostats fail in the first place.

Our biggest Middleburg dryer ticket was $660 for a heating element, two thermostats and a machine cleaning on one visit — a dryer that had been running hot for a long time because the air had nowhere to go. A blocked duct is also a fire risk, so we treat it as the first question on a no-heat call rather than an upsell at the end.

What do I pay if the dryer does not need a part?

In Middleburg, 2 of 10 paid dryer visits, which is 20 percent and matches our company-wide dryer figure of 20.5 percent — the highest part-fitted share of any appliance we service. Set against 60 percent on washers in this same ZIP, that is a three-to-one difference.

A dryer either heats or it does not, and behind that there is almost always a failed component. If you pay the $99 and there is no part to fit, you pay nothing else.

Which dryer brands do you see in Middleburg?

Of 7 branded dryer jobs in 32068: GE 3, Maytag 2, Samsung 1 and LG 1. The repairs skew toward straightforward parts — a mechanical timer, a drive belt, a terminal block assembly on the 240-volt supply side — rather than electronics, with only one control board in the whole local book.

Common failure parts for GE, Whirlpool and Maytag platforms ride on the van, so most Middleburg dryer repairs are a single visit. This reflects how often we are called to a brand, not how reliable it is.

Do you work on gas dryers, and what do they cost?

We do, and much of rural Clay County runs on propane rather than piped gas. But we will not publish a component price for gas dryers, because across our entire company book gas igniters and valve coils appear fewer than ten times each, and a price line built on that is not data.

The job shape is this: no-heat on a gas dryer is usually the igniter, the flame sensor or the valve coils, all in the burner tube at the bottom front of the machine, and all diagnosed on the same $99 visit as an electric fault. You get the total before any work starts.

Why is the diagnostic $150 on my stacked laundry unit?

Because a stacked washer-dryer has to be pulled out and separated before either half can be assessed, and that is genuine work before any diagnosis begins. The same applies to a double wall oven.

On every other appliance the diagnostic is $99. In both cases the fee is credited against the repair total when you approve the work, so you are not paying twice, and the completed repair carries the same 90-day parts and labor warranty.

Is it worth repairing, or should I replace it?

At $328 median with a part replaced against roughly $650 to $1,100 for a mid-market replacement installed, repair wins comfortably on any dryer with a sound drum and motor.

The two cases worth thinking twice about are a control board at $478 on a machine past ten years, and a second heating element on a dryer whose vent was never dealt with — in that second case the honest fix is the duct, not another part.


Book Dryer Repair in Middleburg, FL

13 dryer jobs on record in 32068, all of them in the last twelve months. $99 diagnostic applied to the repair and $150 on a stacked pair, 90-day parts and labor warranty.

Book online Call us
Book online Call us