Dryer Repair in Fleming Island, FL
Dryer repair on Fleming Island runs a median of $385 once a part is replaced, from 13 dryer jobs inside ZIP 32003 — 10 paid and 7 with a component replaced. Dryers are 19.4 percent of everything we can classify in this ZIP against 10.7 percent company-wide, tied with ovens for second place.
But the number that should change what you do is not the median, it is what keeps appearing on the invoices. Four separate Fleming Island tickets replaced a heating element together with two, three or four thermostats at once, and cleaned out the machine while doing it.
One ticket itemises the work plainly: cleaning ventilation system, $245. Dryers do not lose four thermostats at random. That is what restricted airflow does.
Dryer Repair in Fleming Island, FL 32003
11 of our 13 Fleming Island dryer jobs are from the last twelve months. Elements, thermostats, belts and rollers for the mainstream platforms ride on the van.
What Dryer Repair Costs Here, by Component
Component rows are company-wide, since seven local jobs cannot be split across ten named repairs. One caveat on our local figure before you use it: the $385 includes a ticket that covered a washer and a dryer on the same visit — suspension rods on the washer at $341, ventilation cleaning on the dryer at $245.
Take that combined invoice out and the remaining six give $380, which is the number we would actually plan on. Both sit above the company median of $352, and the section below explains why. Every figure is the part, the labour and the service call together.
| Repair | Median, full ticket | Source | Jobs (n) |
|---|---|---|---|
| Door switch | $321 | Company-wide | 54 |
| Drive belt | $322 | Company-wide | 259 |
| Thermal fuse | $332 | Company-wide | 84 |
| Drum rollers or idler pulley | $349 | Company-wide | 218 |
| Thermostat | $350 | Company-wide | 144 |
| Blocked vent cleared | $350 | Company-wide | 43 |
| Heating element | $362 | Company-wide | 360 |
| Blower wheel | $368 | Company-wide | 22 |
| Drive motor | $394 | Company-wide | 55 |
| Control board | $478 | Company-wide | 71 |
| All dryer jobs with a part replaced | $352 · middle half $294 to $437 | Company-wide | 4,218 |
| All dryer jobs with a part replaced | $385 · $380 excluding one combined ticket | Fleming Island 32003 | 7 |
The Fingerprint in Our Fleming Island Invoices
Here are the actual descriptions, because they make the point better than any explanation. One job: replacement of the heating element and two thermostats, $437. Another: replacing four thermostats, cleaning inside the dryer, $426. Another: replacing the heating element and two thermostats, cleaning the inside of the dryer, $390.
Another: removing coins from the dryer, cleaning the dryer, cleaning the ventilation, $295. And a fifth, on a combined washer-and-dryer visit: Dryer: cleaning ventilation system, $245. Separately, one machine was quoted for a high-limit thermostat and a thermistor, and another had a thermal fuse replaced at $174.
A dryer has a chain of heat safety devices — a cycling thermostat, a high-limit thermostat and a thermal fuse — and every one of them exists to cut the heat when air stops moving. They are not supposed to fail. They fail when they have been doing their job repeatedly for months because the exhaust cannot clear.
By the time a technician is replacing four of them and vacuuming out the cabinet, the machine has been running hot for a long time, and the element usually goes with them. The cheap version of this repair is the one you do while it is still just a vent.
Why Fleming Island Dryers Fail the Way They Do
Fleming Island is a peninsula with water on all four sides — the St. Johns River east, Doctors Lake north, Black Creek south, Swimming Pen Creek west — and 12,043 housing units built largely from the late 1990s onward, after the Navy runways that had covered the land since 1942 were demolished to open it for development.
Development-built single-family housing puts the laundry room inside the house rather than on an outside wall, and runs the exhaust duct through a wall cavity, an attic or a floor to reach outside. Longer runs, more elbows, and a duct nobody has opened since the house was finished.
Add north Florida humidity, which means the air being pushed through is already carrying moisture, and lint that would stay loose in a dry climate mats into a felt-like layer instead. That is the mechanism behind every one of the invoices above.
Dryers tie with ovens for second appliance here 13 OF 67 CLASSIFIED JOBS
Of the 67 Fleming Island jobs where the paperwork names an appliance, 13 are dryers — 19.4 percent against 10.7 percent company-wide, and level with ovens at 13. In most areas we cover the dryer is fourth or fifth. Sixty-seven classified jobs is a real sample, so this is not noise.
And there is a second layer to it: 77 of our 144 jobs in this ZIP carry no appliance tag at all, and several of those untagged descriptions are unmistakably dryer work — the heating element and thermostat jobs quoted above are among them. So the true dryer share here is if anything understated by the 19.4 percent.
Three of ten paid visits end with a part fitted 70 PERCENT
Our Fleming Island dryer part-fitted share is 70 percent, above the company-wide dryer figure of 20.5 percent but well below the 75 percent we record on dishwashers in this same ZIP. Dryers remain one of the more conclusive appliances to call us about — the machine either heats or it does not, tumbles or it does not, and behind either symptom there is usually a failed component.
The visits that end empty are typically the ones where the complaint is slow drying rather than no drying, and the cause turns out to be the duct rather than the machine. Which is why the free airflow check below sits above the booking button.
Gas, stacked and combo units all appear in this ZIP THREE DIFFERENT MACHINE TYPES
Our local book contains an Electrolux gas dryer at $454, a washer-dryer combination unit at $425 and a stacked pair, alongside conventional electric machines. Three things follow.
On a gas dryer, no-heat is usually the igniter, flame sensor or valve coils rather than an element — and we will not publish component prices for those, because across our whole company book gas igniters and valve coils appear fewer than ten times each, which is not enough to build a price line on.
On a stacked pair or a combo, the diagnostic is $150 rather than $99, because the units have to be pulled and separated before either can be assessed. Tell us which you have at booking.
Coins are a real repair line, not a joke $295 REMOVED AND CLEANED
One Fleming Island job was logged as removing coins from the dryer, cleaning the machine and clearing the ventilation, at $295. Loose change works its way past the drum seal and into the blower housing, where it rattles, restricts airflow and, in the worst case, cracks a blower wheel at $368.
The tell is a metallic rattle that changes pitch with drum speed. If you hear that, stop using the machine and empty your pockets before the next load — a thirty-second habit that removes an entire repair category from your life.
Weak airflow at the vent flap? Deal with the duct before the element and the thermostat chain follow it. Clearing a vent is $350 and it is cheaper than what comes next. Book online or call (954) 902-6229.
Match Your Symptom to the Likely Cause
- Tumbles but clothes come out damp — heating element at $362, or a vent run that has silted up at $350. Company-wide this symptom is 226 repairs at a $365 median. Check the outside vent flap first; it decides which of the two you are buying, and on this peninsula it is very often the duct.
- No heat at all — element, thermal fuse at $332, or a thermostat at $350. Our largest dryer symptom company-wide at 969 repairs. One local job replaced a thermal fuse at $174; several replaced elements and thermostats together. See dryer not heating.
- Runs then shuts off partway through the cycle — a thermostat cutting out on high temperature, which nearly always means restricted airflow rather than a failed part. This is the early warning for everything described on this page. Act on it.
- Metallic rattle that changes pitch with the drum — coins or a hairgrip in the blower housing. One local job was exactly this, cleared at $295. Left alone it can crack a blower wheel at $368.
- Loud rumbling or squealing — drum rollers or the idler pulley at $349. Noise is our biggest dryer category company-wide at 601 repairs, and one local job replaced a roller with a cabinet clean and lubrication at $250.
- Completely dead, no lights — door switch at $321, thermal fuse, or a control board at $478. On a gas machine, no-heat with a working drum is the igniter or valve coils instead.
Where on Fleming Island We See This Work
All 13 dryer jobs are in ZIP 32003, and 11 of them fall inside the last twelve months, which makes the dryer one of the more current samples on this cluster.
The ZIP answers to three names: USPS lists Fleming Island as primary and accepts Fleming Isle and Orange Park for the same addresses, and our own paperwork splits 96 to 48 in favour of Orange Park depending on what people say when they call.
If your ZIP is 32003, this page is yours whichever name your mail carries. ZIP 32073 is the incorporated town of Orange Park with its own Orange Park dryer page, and 32065 is Oakleaf with its own Oakleaf dryer page. One price across the whole peninsula, no travel surcharge. Coverage detail on the Fleming Island appliance repair hub.
Repair or Replace, in Fleming Island Numbers
A dryer repair with a part replaced runs $385 here, or $380 setting aside one combined washer-and-dryer ticket, against roughly $650 to $1,100 for a mid-market replacement installed.
That is a wide margin, and it is why dryers carry the most straightforward call in our entire company book — only 20.5 percent of households who receive a dryer diagnosis turn the repair down, against 41 percent on washers and 44 percent on freezers.
A dryer is mechanically simple and long-lived, and a $380 repair on a sound drum and motor is good value. The case that genuinely turns is the one this page is about: a machine on its second heating element, whose thermostats have been replaced before, on a vent nobody has dealt with.
There the honest recommendation is to fix the duct first and then decide about the machine, because a new dryer on the same duct will follow the old one. Expected life is in how long dryers last, framework in the repair or replace guide.
Discounts Applied Automatically
Priority Membership
$179 a year — five diagnostics, priority slots
- Five free diagnostic visits a year, a $495 value
- Priority scheduling with 24 to 48 hour response
- $30 off labor on every repair
- Extended warranty on all Bozmanfix work
What Customers Say About Our Dryer Work
“Dmitriy did efficient and effective work for my dryer that had a busted component. Showed me the breaks specifically and explained the repairs well. Happy and would use again.”
“My dryer quit working last week. They got me scheduled very quickly, came out on time and fixed the problem within 30 minutes. I always love using them.”
“Vladimir did an amazing job, he was very fast and professional. My dryer works great.”
“Was having dryer problems. Chris was great. Very efficient, was in and out in 15 minutes, super easy. Highly recommend.”
Dryer Repair on Fleming Island — Questions We Get
How much does dryer repair cost on Fleming Island, FL?
The median is $385 once a part is replaced, parts and labor and the service call together, from 7 component replacements out of 10 paid dryer visits in ZIP 32003. One of those seven was a combined washer-and-dryer visit; excluding it the remaining six give $380, which is the figure we would plan on.
Both sit above the company median of $352 across 4,218 jobs. By component, company-wide: door switch $321, drive belt $322, thermal fuse $332, drum rollers $349, thermostat $350, vent cleared $350, heating element $362, blower wheel $368, drive motor $394, control board $478.
Why do your Fleming Island invoices list several thermostats at once?
Because the airflow was restricted for a long time before we arrived. A dryer has a chain of heat safety devices — a cycling thermostat, a high-limit thermostat and a thermal fuse — and all of them exist to cut the heat when air stops moving.
They fail from doing that job repeatedly, not at random. Four separate local tickets replaced a heating element together with two, three or four thermostats and cleaned out the machine, and one itemised the ventilation cleaning at $245. If a technician is replacing several thermostats on your dryer, the duct is the actual fault.
My dryer runs but the clothes are still damp. What is it?
Either the heat has failed or the air is not moving, and you can tell which for free. Run the machine two minutes and hold your hand over the outside vent flap. Strong warm airflow means the duct is clear and the fault is the element at $362, a thermal fuse at $332 or a thermostat at $350.
Weak airflow means the duct is the problem, and clearing it is $350. On this peninsula it is very often the duct — getting the order right is the difference between fixing the cause and paying for the same part twice.
Do you clean dryer vents on Fleming Island?
Yes. Company-wide a cleared blocked vent runs $350 across 43 jobs, and locally we have itemised ventilation cleaning at $245 on one ticket and cleared the ventilation alongside removing coins on another at $295. It is the same money as a new heating element, and it is the most common reason elements and thermostats fail in the first place.
Development-built housing here typically runs the exhaust duct through a wall cavity or attic to reach outside, so the run is long, has several elbows, and has usually not been opened since the house was built. A blocked duct is a fire risk as well as a repair bill.
What does the $99 diagnostic cover?
The technician tests the appliance, identifies the fault, and gives you a firm total before any work starts. When a part is needed the $99 comes off the repair, and every completed repair carries a 90-day parts and labor warranty.
When the fix turns out to be a setting, a filter or something that can safely wait, you pay the diagnostic only and get told exactly what to watch for. Either way you know the number before anything is spent.
Do you work on gas dryers, and what do they cost?
We do — one of our Fleming Island jobs was an Electrolux gas dryer at $454. But we will not publish a component price for gas dryers, because across our entire company book gas igniters and valve coils appear fewer than ten times each, and a price line built on that is not data.
The job shape is this: no-heat on a gas dryer is usually the igniter, the flame sensor or the valve coils, all sitting in the burner tube at the bottom front of the machine, and all diagnosed on the same $99 visit as an electric fault. You get the total before any work starts.
Why is the diagnostic $150 on my stacked or combination unit?
Because the two halves have to be pulled out and separated before either can be assessed, and that is genuine work before any diagnosis begins. The same applies to a double wall oven. Our local book includes both a stacked pair and a washer-dryer combination unit at $425.
On a freestanding dryer the diagnostic is the standard $99. Either way the fee is credited against the repair total when you approve the work, and the completed repair carries the same 90-day parts and labor warranty.
Is it worth repairing, or should I replace it?
At $380 to $385 with a part replaced against roughly $650 to $1,100 for a mid-market replacement installed, repair wins comfortably on any dryer with a sound drum and motor — which is why 20.5 percent of households company-wide go ahead with a dryer repair, the highest rate of any appliance.
The case that turns is a machine on its second heating element whose thermostats have already been replaced once, on a duct nobody has cleared. There the honest answer is to fix the duct first and then decide about the machine, because a new dryer on the same duct will go the same way.
Appliance Repair Services on Fleming Island, FL
Five more service pages for ZIP 32003, each built on the local jobs behind it.
Appliance Repair on Fleming Island — cluster hub, all of 32003 Serving Fleming Island, FL and the wider Jacksonville area → View our full service areaBook Dryer Repair on Fleming Island, FL
13 dryer jobs on record in ZIP 32003, 11 of them in the last twelve months. $99 diagnostic applied to the repair and $150 on a stacked or combination unit, 90-day parts and labor warranty.