Dryer Repair Winder GA
A dryer repair in Winder, GA runs a median of $295 when a part is replaced, and $229 across all paid Winder dryer jobs — parts, labor and the service call together. That comes from 26 dryer calls in Winder, nine of which finished with a part replaced. That $295 makes the dryer the cheapest appliance we repair in this town, and it is well under the Georgia dryer median of $344. Diagnostic is $99 and it comes off the repair when you approve the work, or $150 on a stacked washer-dryer because the stack has to be separated before anything can be tested. Gas and electric, all major brands, every address in 30680.
Dryer Repair in Winder, GA
No heat, screeching or thumping, running forever with damp clothes, or dead when you press start? Our shop is in Winder, so this is a short local run.
Dryers are the most mechanically honest appliance in the house. Almost everything that goes wrong is heat, airflow, or something spinning that should not sound like that — and none of it involves a sealed system or a part worth more than the machine. That is why the Winder median lands at $295 with a part replaced while a refrigerator here is $388 and a washer $364. If your dryer is broken, the realistic question is not whether to repair it but how soon.
One Winder job on our books says a lot about this town: a used dryer with a loud squeak where the entire roller kit was worn out and all four rollers had to be replaced. Second-hand and inherited machines are common in Barrow County, they arrive with unknown service history, and rollers are exactly the part that quietly wears out on a machine nobody has ever opened. Our neighbouring cluster page for dryer repair in Marietta is dominated by stacked units and long duct runs through townhome laundry closets, which is a different pattern from the freestanding machines in detached houses we see here. City-wide coverage is on our appliance repair in Winder GA page, and ZIP-level coverage on appliance repair in 30680.
What It Costs by Symptom — From 5,870 Completed Dryer Jobs
Median totals, parts and labor and the service call together, grouped by what the dryer is actually doing. These are our own invoices rather than a national estimate.
| What the dryer is doing | Median total | Jobs (n) |
|---|---|---|
| Burning smell | $327 | 28 |
| Will not start at all | $328 | 212 |
| Runs but the drum will not turn | $335 | 165 |
| Noisy — squealing, thumping, grinding | $350 | 586 |
| Runs but clothes are still damp | $365 | 224 |
| No heat at all | $370 | 967 |
And the same data by part, with sample sizes
| Repair | Median total | Jobs (n) |
|---|---|---|
| Drum belt | $323 | 260 |
| Door switch or latch | $324 | 68 |
| Thermal fuse | $329 | 94 |
| Idler pulley | $330 | 93 |
| Timer | $346 | 85 |
| Cycling thermostat | $350 | 142 |
| Vent and duct cleaning | $359 | 271 |
| Drum rollers or bearings | $360 | 165 |
| Heating element | $360 | 341 |
| Moisture sensor | $361 | 138 |
| Blower wheel or motor | $385 | 75 |
| Control board | $484 | 70 |
Winder by ZIP, and the towns we cover around it
| ZIP | Area | Our completed calls |
|---|---|---|
| 30680 | Winder, Barrow County — our own address | 299 of 300 |
| 30052 | Loganville | 463 |
| 30549 | Jefferson | 252 |
| 30019 | Dacula | 222 |
| 30548 | Hoschton | 184 |
| 30666 | Statham | 138 |
| 30517 | Braselton | 111 |
| 30620 · 30011 | Bethlehem and Auburn | 105 and 79 |
Winder is a single-ZIP town as far as our records go — 299 of 300 jobs in 30680 — so the numbers here are genuinely local rather than a county blend. The surrounding towns run on the same routes on the same days, and a dryer call in Statham, Bethlehem or Auburn is booked exactly the same way.
The Six Dryer Faults We Actually See in Winder
No heat at all $329 TO $360
The biggest dryer category we handle anywhere: 967 completed jobs at a median of $370. On an electric dryer the suspects are the heating element ($360 across 341 jobs), the thermal fuse ($329) or the cycling thermostat ($350). On a gas dryer it is the igniter or the valve coils instead, which is the same symptom with entirely different parts. Here is the part most people miss: a thermal fuse does not fail randomly. It fails because the machine overheated, and the machine overheated because airflow was restricted. Replacing the fuse without clearing the duct just books you a second visit a few weeks later. One free check before you call on an electric model: a half-tripped 240V breaker gives you a dryer that tumbles with no heat. More in dryer not heating.
Squealing, thumping or grinding $350 · 586 JOBS
The Winder signature job. Here we replaced an entire roller kit on a used dryer — all four rollers worn out, which is what a squeak becomes when a second-hand machine with unknown history keeps running. Sound tells you the part: a steady squeal that rises with drum speed is the idler pulley ($330), a rhythmic thump is drum rollers with flat spots ($360), a deep grind is the bearing or the blower wheel ($385). None of it is terminal, but every load wears the failing part further, so the price of waiting is real. Second-hand and inherited machines are common around Winder and they are worth a look even when they seem fine, because rollers and belts wear silently.
Runs forever, clothes still damp $365 · 224 JOBS
This is airflow far more often than heat. A restricted duct means moist air cannot leave, so the dryer keeps running while the load stays wet. Vent and duct work has a median of $359 across 271 completed jobs, and it is the one dryer repair that pays for itself twice — in energy and in reduced fire risk. The second candidate is the moisture sensor at $361, which ends the cycle early because it believes the load is already dry. Free check: with the dryer running, feel the outside vent flap. No strong warm airflow means the duct is your answer. See dryer not drying fast.
Motor runs, drum does not turn $323 · 260 JOBS
The drum belt, and our cheapest dryer repair at a median of $323 across 260 jobs. You can usually confirm it in ten seconds without tools: the motor hums, and the drum spins freely by hand with no resistance at all because nothing is driving it. This is not a machine-ending fault. A dryer with a fresh belt and clean rollers behaves like a new one, which is precisely why the arithmetic on dryers almost never favours replacement.
Will not start at all $328 · 212 JOBS
The door switch or latch at $324 is a more common culprit than anything electronic, because the dryer will not run a cycle it cannot confirm the door is closed on. After that: the thermal fuse, the start switch, then the control board at $484 as the outlier. On electric dryers a half-tripped 240V breaker also produces a dead or heatless machine, so check that and the outlet before booking. If the drum turned fine yesterday and today nothing happens at all, this category is where we start.
Burning smell $327 · 28 JOBS · TREAT AS URGENT
The one dryer symptom we do not treat as routine. Median $327, and it is usually lint against the heating element or packed inside the duct. Stop the cycle, unplug the machine or shut off the gas, and do not run it again to check whether the smell comes back. This is also the symptom where a $99 diagnostic is the cheapest thing in the story: if there is nothing to replace and the duct simply needs clearing, you have paid the diagnostic and removed a genuine hazard from the house.
🌡️ Belts, elements, fuses, rollers and thermostats ride on the truck — the parts behind almost every Winder dryer call, so first-visit fixes are the norm.
Match Your Symptom to the Likely Cause
- Tumbles but no heat, electric dryer — heating element ($360), thermal fuse ($329) or cycling thermostat ($350).
- Tumbles but no heat, gas dryer — igniter or gas valve coils. Same symptom, different parts, diagnosed at the appliance.
- Heats but clothes are still damp after a full cycle — blocked vent or duct ($359). Feel the outside flap for strong warm airflow.
- Stops early with a load that is not dry — moisture sensor ($361) calling the cycle too soon.
- Loud squeal that follows drum speed — idler pulley ($330).
- Rhythmic thumping — drum rollers with flat spots ($360). In Winder we have replaced all four at once on a used machine.
- Deep grinding or rumble — drum bearing or blower wheel ($385). Stop using it, this one worsens every load.
- Motor hums, drum will not turn — drum belt ($323), our cheapest dryer repair.
- Completely dead, nothing happens — door switch ($324), thermal fuse, or a half-tripped 240V breaker on electric models.
- Burning smell — stop now, unplug or shut off the gas. Lint against the element or in the duct ($327).
Which Dryer Brands We See in Winder
Across all Winder calls the tagged brands are Whirlpool 28, Samsung 23, Maytag 18, Frigidaire 17, GE 15, Kenmore 3, LG 2, Amana 2, KitchenAid 1 and Speed Queen 1. Grouped by platform, Whirlpool, Maytag, Amana and most Kenmore make 51 machines and lead this town outright, which is unusual for us: company-wide our most-serviced brand is Samsung, and in Marietta it is GE. That is a Barrow County housing-stock signal rather than a reliability ranking.
On dryers this is genuinely good news for the bill. Whirlpool-platform dryers have shared belts, rollers, elements and thermostats across many model years, so the part is usually on the truck and the job usually finishes on the first visit — which is part of why the Winder dryer median of $295 sits below the Georgia figure of $344. It also means a second-hand Whirlpool or Maytag is a sensible machine to repair rather than replace, since parts availability is not the constraint. The one Speed Queen in the list is effectively commercial equipment in a home laundry room and is built specifically to be repaired. We have LG and Whirlpool factory-trained technicians on staff. Brand differences in general are in most reliable appliance brands.
Repair or replace a dryer
Straight answer: repair, almost without exception. The Winder median with a part replaced is $295 against $600 to $1,200 for a comparable new machine before delivery and hookup, and there is no sealed system and no single part that costs more than the appliance is worth. Dryers typically last 10 to 13 years — see how long dryers last.
The only case worth a pause is a machine past twelve years that needs a control board ($484) on top of mechanical work. Everything else, including a full roller kit and a belt on a second-hand dryer, is well inside the economics of repairing. If you want the decision framework rather than a rule of thumb, it is in the repair versus replacement guide, and you will have the full number from us before any work starts.
Discounts Applied Automatically
Priority Membership
$179 a year — five diagnostics, priority slots
- Five free diagnostic visits a year, a $495 value
- Priority scheduling with 24 to 48 hour response
- $30 off labor on every repair
- Extended warranty on all completed Bozmanfix work
What Atlanta Customers Say About Bozmanfix
“Great job and completed my dryer issue in the same day!”
“Very prompt and fixed my dryer quickly and serviceman was very knowledgeable.”
“My dryer was repaired sooner than I thought it was. Quick and reliable service. Would recommend. 10/10”
“Came to my home to repair my dryer. They did a great job and I really appreciate their service and customer service.”
Dryer Repair in Winder — Questions We Get
How much does dryer repair cost in Winder, GA?
The median is $295 when a part is replaced and $229 across all paid Winder dryer jobs, including parts, labor and the service call. That is the cheapest appliance we repair in this town and below the Georgia dryer median of $344. By part: drum belt $323, door switch $324, thermal fuse $329, idler pulley $330, timer $346, cycling thermostat $350, vent and duct cleaning $359, drum rollers $360, heating element $360, moisture sensor $361, blower motor $385, control board $484. Diagnostic is $99, or $150 on a stacked washer-dryer, applied to the repair when you approve the work.
My dryer has no heat at all. Is it worth fixing?
Yes. No heat is our biggest dryer category, 967 completed jobs at a median of $370, and on an electric dryer it is normally the heating element at $360, the thermal fuse at $329 or the cycling thermostat at $350. On a gas dryer it is the igniter or the gas valve coils. One important detail: a blown thermal fuse almost always means the machine overheated because the vent was restricted, so the duct has to be cleared too or the fuse will go again. Before booking an electric model, check for a half-tripped 240V breaker, because that produces the same symptom for free.
My dryer runs but the clothes are still wet. What is wrong?
Usually airflow rather than heat. A restricted vent or duct means moist air cannot leave the drum, so the machine runs and runs while the load stays damp. Vent and duct work has a median of $359 across 271 completed jobs. The other common cause is the moisture sensor at $361, which ends the cycle early because it thinks the load is dry. Quick check: with the dryer running, feel the outside vent flap, and if there is no strong warm airflow the duct is your problem.
Why is my dryer squealing or thumping?
A squeal that rises and falls with the drum is normally the idler pulley at $330. A rhythmic thump is usually drum rollers worn flat on one side at $360. A deep grinding rumble is the drum bearing or blower wheel at $385. In Winder we replaced a complete roller kit, all four rollers, on a used dryer that had been squeaking. None of these is terminal, but a grinding dryer damages itself further every load, so it is worth booking rather than waiting.
The dryer hums but the drum does not turn. What is that?
Almost certainly the drum belt, our cheapest dryer repair at a median of $323 across 260 jobs. You can confirm it in ten seconds: if the drum spins freely by hand with no resistance at all, the belt has snapped. The motor is fine, which is why you can still hear it running, and a dryer with a fresh belt and clean rollers runs like new.
How dangerous is a clogged dryer vent?
Serious enough to treat as maintenance rather than an option. Lint accumulation in dryer ducts is a recognised residential fire hazard, and a restricted vent makes the machine run longer and hotter every cycle, which is also what kills thermal fuses and heating elements early. If your dryer suddenly needs two cycles to dry one load, or you smell burning, stop using it and get the duct cleared. Burning smell jobs run a median of $327 and we treat them as urgent rather than routine.
Is a second-hand dryer worth repairing?
Usually yes, and second-hand machines are common around Winder. There is no sealed system and no part that costs more than the appliance is worth, so even a full mechanical refresh sits inside sensible economics: belt $323, rollers $360, element $360. The one repair worth pausing on is a control board at $484 on a machine already past twelve years. Whirlpool-platform dryers, which dominate this town, share parts across many model years, so parts availability is rarely the constraint.
Do you repair gas dryers and stacked units in Winder?
Both. Gas and electric, freestanding and stacked washer-dryer combos, in every major brand. The diagnostic on a stacked unit is $150 rather than $99 because the units have to be separated before anything can be reached or tested, and that fee is still applied to the repair when you approve the work. Mention the stack when you book so we arrive set up for it. Every completed repair carries a 90-day parts and labor warranty.
Dryer Not Drying in Winder? Median $295.
Belt $323, thermal fuse $329, heating element $360, vent clearing $359 — eleven of our twelve most common dryer repairs sit within $60 of each other. Cheapest appliance we repair in this town, gas and electric, stackables included, 90-day parts and labor warranty.
Every Appliance We Repair in Winder
Appliance Repair in Winder, GA — all services, 300 local callsDryer Repair Across Metro Atlanta
Winder is one town in a much larger Georgia service area. Same pricing, same 90-day parts and labor warranty.
Dryer Repair in Atlanta — the full metro service area