Dishwasher Repair Stonecrest GA
Dishwasher repair in Stonecrest, GA runs a median of $367 once a part is actually replaced, with the middle half of those jobs between $291 and $399, and the largest dishwasher invoice we have ever billed here is $432. That comes from 19 dishwasher jobs inside Stonecrest across 18 households, 17 of them finishing as paid work and 11 with a part fitted.
There is no outlier table on this page because nothing needs disclosing: no local dishwasher repair has reached $500. What this city does have is the tightest single-component pattern anywhere in this cluster. Four of our six written-up local tickets are the drain system.
Dishwasher Repair in Stonecrest, GA
Standing water in the bottom, dishes coming out gritty, a puddle at the toe kick, a cycle that will not start, a door that will not latch. The whole city. Total confirmed before the work starts.
The Dishwasher Repairs We Have Actually Done in Stonecrest
Eleven local part-repairs, six of them written up in enough detail to name the work. Read the list and one component appears again and again.
| Date | Total | What the invoice records |
|---|---|---|
| November 2025 | $412 | GE, drain pump solenoid replaced |
| July 2023 | $399 | Water valve replaced |
| January 2026 | $388 | Frigidaire, drain pump replaced |
| May 2026 | $368 | Frigidaire, circulation pump replaced |
| May 2026 | $367 | Dishwasher repair, component not written up |
| March 2025 | $291 | Frigidaire, drain pump replaced |
What a Dishwasher Repair Costs, by the Part That Failed
Company-wide, from 2,684 completed dishwasher jobs, because eleven local repairs cannot price nine components. Every figure is the full ticket: the part, the labor and the service call added together. The Stonecrest local median of $367 sits between the drain pump line and the circulation motor line, which is precisely where four of our six written-up local jobs landed.
| What failed | Median total | Middle half | Jobs (n) |
|---|---|---|---|
| Spray arm | $283 | $275 to $419 band | 12 |
| Door latch or door switch | $312 | $275 to $419 band | 28 |
| Door gasket | $330 | $275 to $419 band | 42 |
| Water inlet valve | $340 | $275 to $419 band | 37 |
| Drain pump | $350 | $275 to $419 band | 273 |
| Heating element | $362 | $275 to $419 band | 40 |
| Circulation motor | $374 | $275 to $419 band | 122 |
| Control board | $387 | $275 to $419 band | 93 |
| Detergent dispenser | $423 | $275 to $419 band | 27 |
The drain pump at $350 is by a wide margin the most replaced dishwasher part in our entire company file, at 273 of the repairs behind that table, and Stonecrest reproduces that pattern at local scale. The circulation motor at $374 is the other big one, and the two get confused constantly because both present as “it is not cleaning”.
One moves dirty water out of the sump, the other pushes clean water up through the spray arms. Our local file contains both, so this page can explain the difference from our own invoices rather than from theory.
Why Stonecrest Dishwashers Fail the Way They Do
Two pumps, two jobs, and the words that tell them apart $350 AND $374
Every dishwasher has two pumps and almost nobody knows it. The drain pump empties the sump at the end of the cycle and pushes the dirty water out to the disposal or the standpipe. The circulation pump takes clean water from the sump and drives it up through the spray arms with enough pressure to knock food off a plate.
When the drain pump fails you get standing water at the end of a cycle; when the circulation pump fails you get a machine that runs quietly through a full cycle and leaves everything dirty.
Two different complaints, two different parts, and both are in our Stonecrest file: drain pumps at $291 and $388, a circulation pump at $368. What you say on the phone genuinely decides what comes on the van.
A drain pump solenoid at $412 is a third thing again LOCAL TICKET
One GE ticket in our Stonecrest file reads drain pump solenoid replacement, at $412. On some GE designs the drain function is not a separate motor at all: a single motor runs the wash, and a solenoid-operated valve or actuator switches it between circulating and draining.
When that solenoid fails the machine still washes perfectly and simply will not empty, which looks identical to a dead drain pump from the kitchen and is a completely different part. It is one of the clearest cases on this site of why a technician opens the machine before anyone orders anything, and why the model number matters when you book.
The water valve is the other end of the same story $399 LOCAL
One Stonecrest ticket is a water valve replacement at $399, above the company-wide figure of $340. The inlet valve is a solenoid that lets mains water into the machine for a measured time. When it weakens the machine underfills, so the spray arms never build pressure and the wash fails, which reads as a cleaning fault rather than a filling one.
When it fails open it weeps continuously and produces a puddle that reappears even when the machine has not run. Between the inlet valve, the two pumps and the drain path, almost everything a Stonecrest dishwasher has needed from us is about moving water rather than heating it.
Frigidaire is most of this file 5 OF 19
Our nineteen Stonecrest dishwasher records carry Frigidaire five times, GE twice, and Amana, Whirlpool and Samsung once each. Three of our six written-up repairs are Frigidaires, including both drain pumps and the circulation pump. Frigidaire is also fourth overall in this city at 20 jobs across all appliances.
That is a builder-package signature rather than a verdict on the manufacturer, and it is a count of service calls not a reliability ranking, since a common brand generates more calls at the same failure rate. What it changes is stocking: Frigidaire pumps and valves ride on the van for this city.
Standing water has four causes and two are not the appliance $350 OR LESS
Water sitting in the sump after a cycle is the most common dishwasher call we take anywhere, and in this city it is the dominant one. The drain pump at $350 is the usual answer and our local file confirms it twice.
But a blocked filter basket, a kinked or badly looped drain hose, or a garbage disposal knockout plug that was never removed when the dishwasher was installed all produce the identical symptom for no fault of the machine itself.
That last one turns up regularly in houses where the disposal was replaced after move-in. A technician follows the whole drain path before condemning a pump, which is what keeps an invoice at the bottom of the price table rather than the middle.
No published hardness figure, so cloudy glass is a machine question SCOTT CANDLER
Almost every dishwasher article reaches for hard water, and we cannot, because we cannot source it. DeKalb County draws its water from the Chattahoochee River north of the county and upstream of the City of Atlanta, treated at the Scott Candler Water Treatment Plant, and that is from the county’s own drinking water quality report.
We read that report looking for a hardness figure and it does not contain one, so there is no hardness number on this page and no claim that scale is why your glasses are cloudy. Our local file points somewhere else entirely: pumps and valves.
The full mechanism is in dishwasher not cleaning dishes and leaks in dishwasher leaking from the bottom.
🚚 The whole of Stonecrest is one dispatch zone and the pumps and valves in the table above ride on the van, which is why most dishwasher repairs here finish in a single visit.
Match Your Symptom to the Likely Cause
- Standing water in the bottom after every cycle — the drain pump at $350, which we have replaced locally twice at $291 and $388, or on some GE designs a drain pump solenoid, which we replaced locally at $412. A blocked filter basket, a looped drain hose or a disposal knockout plug produce the same symptom.
- Runs quietly through a full cycle and leaves everything dirty — the circulation pump at $374, which we replaced on a Frigidaire locally at $368. A different pump from the one above and a different complaint.
- Underfills, so the wash never builds pressure — the water inlet valve at $340, which we replaced locally at $399. It reads as a cleaning fault and it is a filling one.
- Puddle that reappears when the machine has not run — the inlet valve weeping, or a drain hose connection dripping inside the sink cabinet and running forward.
- Dishes come out greasy rather than gritty — the heating element at $362 is not bringing the wash up to temperature, so the detergent never activates.
- Dishes come out gritty — spray arms at $283, the circulation pump, or a filter recirculating dirty water. See dishwasher not cleaning.
- Will not start, or the door will not latch — door latch and door switch at $312. The machine will not run at all if it cannot confirm the door is shut.
Repair or Replace a Dishwasher in Stonecrest
This is the clearest repair-or-replace case of any appliance we cover, and the local numbers make it clearer still.
The most expensive line on the company-wide component table is $423, no Stonecrest dishwasher repair has ever reached $500, and a mid-market replacement costs more than either before you add delivery, disposal of the old unit and the plumbing and electrical connection, which on a built-in is not a plug-in job. Under about twelve years old, repair wins on every fault in the table.
Replacement starts to compete in two situations. One is a machine past a decade needing a control board at $387 plus a circulation motor at $374 in the same visit, because that total approaches the installed cost of a new unit and the rest of the machine is the same age.
The other has nothing to do with the appliance: a dishwasher that has been weeping quietly into a cabinet base for months may already have caused damage that costs more than either option, which is why a puddle is worth a call the same week rather than the same month.
Expected service life is in how long dishwashers last and the framework in the repair or replace guide.
Discounts Applied Automatically
Priority Membership
$179 a year, five diagnostics and priority slots
- Five free diagnostic visits a year, a $495 value
- Priority scheduling with 24 to 48 hour response
- $30 off labor on every repair
- Extended warranty on all Bozmanfix work
What Atlanta Area Customers Say About Bozmanfix
“Denis was absolutely wonderful. He took the time to thoroughly inspect my dishwasher and give his diagnosis. Repair was done within the next day quickly and efficiently.”
“Max from Bozmanfix came out about 3 hours after our first call and had the dishwasher apart and then fixed within 45 mins.”
“In and out! I am so glad. I tried to fix the dishwasher myself and I wish I called sooner.”
“Dennis did a great job fixing our dishwasher. The top rack rails were broken and needed new brackets to be replaced.”
Stonecrest Dishwasher Repair, Answered
How much does dishwasher repair cost in Stonecrest, GA?
The median is $367 once a part is replaced, with the middle half of local jobs between $291 and $399, from 19 dishwasher jobs inside Stonecrest. The largest dishwasher invoice we have ever billed here is $432 and none of our 17 paid local visits has reached $500.
The $99 diagnostic comes off the bill when you approve the repair, and every figure is the part, the labor and the service call together.
Does a dishwasher really have two pumps?
Yes, and almost nobody knows it. The drain pump empties the sump at the end of the cycle and pushes dirty water out to the disposal or standpipe. The circulation pump takes clean water from the sump and drives it up through the spray arms hard enough to knock food off a plate.
A failed drain pump leaves standing water; a failed circulation pump leaves a machine that runs quietly and cleans nothing. Both are in our Stonecrest file, at $291 and $388 for drain pumps and $368 for a circulation pump.
Why is there standing water in the bottom of my dishwasher?
The drain pump at $350 all in is the usual answer and the most replaced dishwasher part in our entire company file, and we have replaced two locally. On some GE designs it is not a separate pump at all but a solenoid-operated actuator that switches one motor between washing and draining, which we replaced locally at $412.
A blocked filter basket, a kinked drain hose or a disposal knockout plug never removed at installation produce the identical symptom.
My dishwasher runs but nothing gets clean. What is that?
Most likely the circulation pump, which is a different part from the drain pump and produces a different complaint: the machine runs through a full quiet cycle and leaves everything dirty. We replaced one on a Frigidaire in Stonecrest at $368. The other candidates are cracked or blocked spray arms at $283, a filter recirculating dirty water, or an inlet valve underfilling the machine so the arms never build pressure.
Is hard water ruining my dishwasher in Stonecrest?
We cannot tell you that, because we cannot source it. DeKalb County draws its water from the Chattahoochee River upstream of the City of Atlanta and treats it at the Scott Candler plant. We read the county drinking water quality report looking for a hardness figure and it does not contain one, so there is no hardness number on this page.
Our own local file points somewhere else entirely: four of six written-up repairs here are pumps and valves.
Which dishwasher brands do you see most in Stonecrest?
Frigidaire five times, GE twice, and Amana, Whirlpool and Samsung once each across nineteen local records. Three of our six written-up repairs are Frigidaires, including both drain pumps and the circulation pump. That is a builder-package signature rather than a verdict on the manufacturer, and it is a count of service calls, not a reliability ranking.
Is it worth repairing a dishwasher or should I replace it?
Repair wins in almost every case, and this is the clearest example of any appliance we cover. The most expensive line on our company-wide component table is $423 and no Stonecrest dishwasher repair has reached $500, while a mid-market replacement costs more than that before delivery, disposal of the old unit and the plumbing and electrical connection, which on a built-in is not a plug-in job.
Replacement only competes when a machine past ten years needs a control board and a circulation motor in the same visit.
More Appliance Repair in Stonecrest, GA
The other appliances in the house have their own Stonecrest pages, each with its own local job count and its own component table.
Appliance Repair in Stonecrest Serving Stonecrest, GA and the wider Atlanta area → View our full service areaBook a Stonecrest Dishwasher Technician
A live cycle run and watched, both pumps tested separately, the $99 diagnostic applied to the repair and a 90-day parts and labor warranty behind the work.